Increase Signal Capacity Without Installing More Fiber-Optic Cables.
The MultiDyne FiberSaver is an innovative solution for combining as many as 18 HD–SDI feeds, or optical signals of any wavelength onto one single–mode fiber. Mobile trucks, OB vans and facility managers can now offer expanded video and audio capacity when hosting major events without having to deal with additional fiber cabling and the associated costs. The MultiDyne FiberSaver transport accepts SDI video signals ranging from 270Mbs up to 3Gbs and converts them into optical signals.
The MultiDyne FiberSaver has the capacity to handle any combination up to 18 existing transmitter/receiver or new copper HD–SDI feeds that are then combined and sent over just one single–mode fiber. Consider the system expansion capability offered by the MultiDyne FiberSaver; an 18–strand fiber cable could now provide enough capacity for 17 new feeds in addition to the signals handled by the MultiDyne FiberSaver that uses only one strand from the 18–strand cable.
Multiplex any wavelength
Mux up to 18 optical signals of any wavelength onto one fiber
Up to 4.25Gbps conversion and multiplexing
Offered as a 6 channel, 12 channel, and 18 channel system
APPLICATIONS
SDI Input/Output | |
---|---|
Bit Rates | 19 Mbps to 3Gbps |
Connectors | BNC |
Impedence | 75 Ohms |
Signal Level | 800 mV nominal pp |
Standard | SMPTE 425M, 297M, 292M, 259M-C & DVB-ASI |
Return Loss | >15 dB at 5 MHz – 1.485 GHz >10 dB at 1.5 GHz to 3 GHz |
Jitter (wideband) | HD: < 0.3 UI |
Optical Input/Output | |
---|---|
Data Rates | Up to 4.25Gbps |
Connectors | ST, SC |
Input Range | 1250 – 1650nm |
Input Power | -7 to -15 dBm |
Interface | Digital optical |
Output Power | -3 dBm typical |
Output Range | Muxed CWDM freq. |
Mechanical, Environmental (FS-6000) | |
---|---|
Overall Dimensions (L x W x H) |
6.75” x 5.5” x 1.75” |
Weight | 1 lbs. |
Mechanical, Environmental (FS-12000 & 18000) | |
---|---|
Overall Dimensions (L x W x H) |
19” x 5.5” x 1.75” |
Weight | 3 lbs. |
Power | 9-24 VDC, <20 watts |
Temperature | 0 to +55C |
Humidity | 0 to 95% non-condensing |
ORDERING INFORMATION
FS-6000 | |
---|---|
FS-6000-TX-ST | 6 Ch. FiberSaver Transmitter for up to 6 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-6000-RX-ST | 6 Ch. FiberSaver Receiver for up to 6 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-6000-DEMUX-ST | 6 Ch. FiberSaver Optical Daemultiplexer: 1 multiplexed optical input from FS-6000-TX-ST, 6 optical outputs |
FS-12000 | |
FS-12000-TX-ST | 12 Ch. Fiber Saver Transmitter for up to 12 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-12000-RX-ST | 12 Ch. Fiber Saver Receiver for up to 12 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-12000-DEMUX-ST | 12 Ch. FiberSaver Optical Demultiplexer: 1 multiplexed optical input from FS-6000-TX-ST, 6 optical outputs |
FS-18000 | |
FS-18000-TX-ST | 18 Ch. Fiber Saver Transmitter for up to 18 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-18000-RX-ST | 18 Ch. Fiber Saver Receiver for up to 18 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec |
FS-18000-DEMUX-ST | 18 Ch. FiberSaver Optical Demultiplexer: 1 multiplexed optical input from FS-6000-TX-ST, 18 optical outputs |
FS-3×3 | |
FS-3×3-TRXA-ST | 3 x 3 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 3 inputs & 3 outputs (BNC or optical) over 1 fiber. |
FS-3×3-TRXB-ST | 3 x 3 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 3 inputs & 3 outputs (BNC or optical) over 1 fiber. |
FS-6×6 | |
FS-6×6-TRXA-ST | 6 x 6 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 6 inputs & 6 outputs (BNC or optical) over 1 fiber. |
FS-6×6-TRXB-ST | 6 x 6 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 6 inputs & 6 outputs (BNC or optical) over 1 fiber. |
FS-9×9 | |
FS-9×9-TRXA-ST | 9 x 9 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 9 inputs & 9 outputs (BNC or optical) over 1 fiber. |
FS-9×9-TRXB-ST | 9 x 9 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 9 inputs & 9 outputs (BNC or optical) over 1 fiber. |
Accessories | |
RMT | Rack mount kit, 1 RU for up to three FS-6000 |
BP-T | Blank panel for RMT kit |
MDS050-P120 | Spare Power Supply for FiberSaver products |