The Fiberlink 3370 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over one single mode fiber. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.
Data signals are not required to operate the Fiberlink 3370 link and it can be used as a stand-alone 3G/HD/SD-SDI optical link. Previously serialized audio that is present SDI stream is left intact throughout the entire transmission process. The 3370 Series is immune to pathological signals over the entire budget link and operating temperature range.
Signals are equalized and re-clocked prior to fiber optic transmission and the 3371 receiver features a re-clocked SDI output.
The 3370 model operates with one single mode fiber.
Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more
Specifications
General Specifications | |
---|---|
Number of Fibers Required | 1 fiber for single mode fiber (Models 3370/3371)
2 fibers for multimode fiber (Models 3372/3373) |
Indicators | Power, Data Rate lock (3G, HD, SD), Alarm (card version only), RS-Data Channel 1, RS-Data Channel 2 & Ethernet LEDs on RJ-45 Connector |
Box Version Dimensions | 6.5 W x 1.15 H x 8 L (inches)
165 W x 29 H x 203 L (mm) |
Weight | approx. 1 lb.; 0.45 kg |
Slots in 6000A Card Cage | 2 |
Power | 9-24 volts, AC or DC
3370: 4.8 watts, 16.4 BTU/Hr 3371: 4.65 watt s, 15.87 BTU/Hr |
Operating Temperature | -10º C to +50º C |
MTBF | 36,000 Hours |
Ethernet Specifications | |
Port | 10/100 Base-T, RJ-45 connector, Auto-MDIX |
Speed | 10 Mbps & 100 Mbps Ethernet, Switch Selectable |
Data Specifications | |
Data Channels | 2 Channels, Bi-Directional |
Data Bandwidth | DC to 115 Kb/sec, max. |
Control Format | Switch selectable RS-232, RS-422 & RS-485 (4 wire or 2 wire); |
Protocols | NRZ, NRZI, RZ, Manchester, Bi-phase |
Signal Connectors | Removable terminal block |
3370 Transmitter: Serial Video BNC Input | |
Number of Inputs | 1 |
Data Rate Range | 270 Mbps to 2.97 Gbps |
Supported Standards | SMPTE 259M, 292, 297-2006, 424M-2006 |
Re-clocked Data Rates | 270 Mbps (SMPTE 259M),
1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M-2006) |
Equalization | Automatic up to 100m of Belden 1694A at 3.0 Gbps, 200m at 1.485 Gbps and 350m at 270 Mbps |
Return Loss | >10dB up to 2.97 Gbps |
3370 Transmitter: Fiber Optic Output | |
Connector | LC or ST |
Wavelengths Used | 1310nm, 1490nm, 1550nm |
Emmiter Type | FP Laser |
Output Power (nominal) | -4.5 dBm |
SDI Re-clocking | At 270 Mbps, 1.485 Gbps & 2.97 Gbps |
3371 Receiver: Fiber Optic Input | |
Connector | LC or ST |
Wavelength | 1100 – 1620 nm |
Minimum Input Sensitivity | -17 dBm at 2.97 Gbps;
-20 dBm at 1.485 Gbps -21 dBm at 270 Mbps; |
Maximum Input Power | 0 dBm |
3371 Receiver: Serial Video BNC Output | |
Number of Outputs | 1 |
Signal Level | 800mV ± 10% |
DC Offset | 0V ± 0.5V |
Rise/Fall Time | < 135 ps at 2.97 Gbps per SMPTE 424M-2006;
< 270 ps at 1.485 Gbps per SMPTE 292; 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M |
Overshoot | < 10% of amplitude |
Timing Jitter | < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps; < 2.0 UI at 2.97 Gbps with color bar signal |
Alignment Jitter | < 0.2 UI at 270 Mbps; < 0.2 UI at 1.485 Gbps; < 0.3 UI at 2.97 Gbps with color bar signal |
Re-clocking | At 270 Mbps, 1.485 Gbps & 2.97 Gbps |